Advanced Driver Assistance Systems (ADAS) Calibration in Tigard, OR
Looking for expert care and honest service?
Tigard SUV and Auto is the go-to auto repair shop Tigard drivers have trusted since 2004. From brake repairs to hybrid maintenance, we offer complete auto care backed by a real business guarantee.
Tigard SUV and Auto Repair provides professional ADAS calibration in Tigard, OR, restoring camera and radar accuracy after windshield, suspension, steering, and collision repairs. Serving drivers since 2004, our ASE Master and Advanced Level (L1) technicians perform manufacturer-specified calibration procedures inside our ASE Blue Seal–recognized facility near Summerlake City Park.
Same-week appointments available.
Call us to schedule your ADAS inspection.
If your vehicle has a driver assist warning light on — or recently had windshield, bumper, alignment, or suspension work — your Advanced Driver Assistance Systems may require recalibration.
- ADAS features such as:
- Automatic Emergency Braking
- Adaptive Cruise Contro
- Lane Keep Assist
- Blind Spot Monitoring
- Forward Collision Warning
Depend on precise camera and radar positioning. Even minor changes in ride height, steering angle, or sensor mounting can shift system accuracy by millimeters — enough to affect response timing and object detection.
- 12394 SW Scholls Ferry Rd, Tigard, OR 97223
- (503) 590-9798
Why ADAS Calibration Matters After Repairs
Modern driver assistance systems operate within strict manufacturer tolerance ranges measured in degrees and millimeters. When alignment geometry or sensor positioning changes, systems may:
- Trigger false forward collision alerts
- Shut off adaptive cruise control unexpectedly
- Drift or overcorrect during lane assist
- Misjudge following distance
- Fail to activate emergency braking when expected
In many cases, no obvious drivability issue is felt — but the system is operating outside factory specifications.
We regularly see vehicles in Tigard after windshield replacement or minor front-end repairs where calibration was overlooked. Once recalibrated to OE specifications, warning lights clear and system accuracy is restored.
Our ADAS Calibration Process
We follow manufacturer service information for each vehicle make and model. Calibration is never guesswork — it is a documented, step-by-step procedure.
1. Inspection & Pre-Scan
- Full system diagnostic scan
- Verification of fault codes
- Review of repair history
- Confirmation of required static or dynamic calibration
2. Mechanical Baseline Verification
- Before calibration begins, we verify:
- Steering angle sensor alignment
- Suspension geometry
- Ride height within specification
- Four-wheel alignment (if required)
Calibration cannot be accurate if the vehicle’s mechanical foundation is out of specification.
3. Manufacturer Specified Calibration
- Depending on vehicle requirements, we perform:
- Static target calibration using precision reference measurements on a level surface
- Dynamic road calibration under controlled driving conditions
- Dynamic road calibration under controlled driving conditions
- Radar aiming and camera targeting procedures per OEM guidelines
We use professional ADAS calibration equipment designed to meet manufacturer measurement standards.
4. Post-Calibration Verification
- Depending on vehicle requirements, we perform:
- Final system scan
- Confirmation of successful calibration
- Documentation review with the customer
- Radar aiming and camera targeting procedures per OEM guidelines
You receive clear results and an explanation of what was performed.
Performed Under Certified Technical Oversight
- ADAS services are completed under the supervision of:
- ASE Master Certified Technicians
- ASE Advanced Level (L1) Diagnostic Specialists
- Inside our ASE Blue Seal–recognized facility
- DEQ-certified and fully compliant
Our technicians complete ongoing training to stay current with evolving vehicle technology and manufacturer calibration standards.
Serving Tigard and Beaverton drivers since 2004, we follow a documented inspection process before recommending any repair — no unnecessary upsells, ever.
When Should You Schedule ADAS Calibration?
- You should schedule an inspection if:
- A driver assist warning light is on
- Your windshield was replaced
- You’ve had bumper, grille, or front-end repairs
- Suspension, steering, or alignment work was performed
- Adaptive cruise control shuts off unexpectedly
- Lane assist feels inconsistent
- You experience false collision warnings
Even without a warning light, calibration is often required after certain repairs.
If you’re unsure, we can perform a diagnostic inspection to confirm your system is operating within manufacturer tolerances.
Tigard Driving Conditions & ADAS Accuracy
- Drivers in Tigard, Beaverton, King City, Bull Mountain, and Cooper Mountain regularly encounter:
- Heavy rainfall
- Ongoing road development
- Uneven pavement transitions
- Stop-and-go commuter traffic
Road conditions west of SW Scholls Ferry Rd and around Summerlake City Park place consistent demand on adaptive cruise and collision avoidance systems.
Proper calibration ensures dependable system performance in real-world local driving conditions.
Why Tigard Drivers Trust Tigard SUV and Auto Repair
- When you choose us, you receive:
- ASE Master & L1 Diagnostic oversight
- Manufacturer-specified calibration procedures
- Digital inspection reports with documented findings
- Clear estimates before any work begins
- 24-month / 24,000-mile nationwide warranty (most qualifying repairs)
- 100% Satisfaction Guarantee
All findings are reviewed with you before approval, consistent with our published Code of Ethics.
We never clear warning lights without identifying and correcting the root cause.
Warranty & Documentation
Most qualifying repairs are backed by our 24-month / 24,000-mile nationwide warranty covering parts and labor.
If calibration documentation is needed for insurance or post-repair verification, we provide clear service records upon completion.
Warranty terms are reviewed before service approval so you know exactly what is covered.
Schedule ADAS Calibration in Tigard, OR
If your vehicle recently had repairs or is showing a driver assist warning, don’t delay calibration.
Tigard SUV & Auto Repair
- 12394 SW Scholls Ferry Rd, Tigard, OR 97223
- https://www.tigardsuv.com
- (503) 590-9798
- service@tigardsuv.com
Conveniently located near Summerlake City Park and serving Tigard, Beaverton, King City, Bull Mountain, Cooper Mountain, and surrounding communities.
Frequently Asked Questions
How long does ADAS calibration take?
Most calibrations are completed the same day. Static procedures typically require several hours. Dynamic calibrations require controlled road testing. After inspection, we provide a clear time estimate.
How much does ADAS calibration cost?
Costs vary depending on how many sensors require calibration and whether static or dynamic procedures are needed. After a diagnostic scan, we provide a detailed estimate before any work begins.
Is calibration required after windshield replacement?
In most cases, yes. Many forward-facing cameras mount directly to the windshield. Glass replacement can shift positioning enough to require recalibration.
Is it safe to drive with an ADAS warning light on?
Your vehicle may still operate normally, but safety features may not function accurately. We recommend scheduling an inspection as soon as possible.
What warranty applies to ADAS repairs?
Most qualifying repairs are backed by our 24-month / 24,000-mile nationwide warranty. Coverage details are reviewed before service approval.